Skip to content
No Vape

What is pressure drop in a vape lab test?

Find the pressure difference and flow condition before comparing how vape devices performed in a machine test.

No Vape · Updated

Stack of old newspapers on a table
Illustrative image · Mr Cup / Fabien Barral / Unsplash

Match the row to the quantity it measured

Williams and colleagues reported pressure drop, airflow and aerosol absorbance separately in their laboratory study of cartomizer-style e-cigarettes. The methods describe two machine protocols that sampled different parts of the device’s operating history. The pressure result describes a measured difference in pressure during a draw. An airflow result can describe how much air passes per unit time or the flow used to start aerosol production, depending on the row. Absorbance describes the optical measurement reported by the researchers. Use the table legend to keep the readings apart. One unit cannot stand in for another simply because the numbers appear on adjacent panels.

Williams and colleagues — PLOS ONE: Comparison of the Performance of Cartomizer Style Electronic Cigarettes from Major Tobacco and Independent Manufacturers

Write down the flow before comparing draws

Imagine a fictional bench comparison. A device tested under one machine draw has a pressure-drop reading, while another device is tested under a different draw. A difference between the readings could reflect both the devices and the test conditions. Ask whether the protocol specifies a comparable airflow basis or uses each device’s own observed threshold. If you only see airflow values, there is no pressure reading to compare. A longer series might also measure several points over device use, so keep the part of the series next to the number. The example gives no instructions about drawing through or adjusting a vape.

Preserve the operating conditions in your note

A useful summary says which models were sampled, which bench protocol produced the result and the units for pressure drop. If you need to compare another chart, check which unit, setup and flow condition it uses before putting the values on the same line. The historical report describes its sampled devices. Its readings do not establish the nicotine someone absorbed, the safety of a device, or what a current model feels like to a particular user. If you cannot locate the test conditions, present the value as the report states it and leave the comparison unresolved.

If a chart shows several puffs, identify whether the reported pressure describes a single draw or summarizes the series before comparing it with a standalone value.

Williams and colleagues — PLOS ONE: Comparison of the Performance of Cartomizer Style Electronic Cigarettes from Major Tobacco and Independent Manufacturers

Sources and scope

Sources inform the guidance. The worksheets and examples are No Vape editorial suggestions, not tested treatments.

  1. Williams and colleagues — PLOS ONE — Comparison of the Performance of Cartomizer Style Electronic Cigarettes from Major Tobacco and Independent Manufacturers
  2. No Vape — No Vape — app features and store links

Written with AI assistance and checked against the cited sources. No clinical review is claimed. This guide covers practical planning, not individual medical treatment. How we research and write