Skip to content
No Vape

A vape’s temperature target and measured coil temperatures can differ

Separate the programmed temperature, the device estimate and a thermocouple trace in a vape study.

No Vape · Updated

Stack of books on a table
Illustrative image · Laura Ohlman / Unsplash

Label the three temperature quantities

In a published test of temperature-control electronic nicotine delivery systems, Dibaji and colleagues report a preset temperature, an internal resistance-based estimate and thermocouple readings. The paper describes thermocouple measurements at specified coil positions. Write “target,” “internal estimate” and “sensor at stated position” beside the corresponding lines. A horizontal line marking the programmed target has a different role from a measured trace.

Read the instrument description before treating a number on the display as a measurement from a particular part of the coil. The paper’s internal estimate concerns the coil as a whole, whereas the separate sensors have defined positions. Preserve that distinction when two lines disagree.

PLOS ONE: Accuracy of commercial electronic nicotine delivery systems (ENDS) temperature control technology

Check a moment and a location

Imagine an invented thermostat graph for a teaching apparatus. The target line stays flat. One sensor passes above the target briefly, while another sensor at the edge stays below it. A controller estimate reaches the target later. A statement that the setting was reached needs to say which line and time it refers to. A statement about the maximum at one point needs a source for that point and should not substitute an end-of-run reading.

The example uses no real temperatures. In the paper, Figure 3 describes temperature at the middle and top of a particular coil under specified tests and compares those readings with the device estimate. A trace covering those conditions does not describe every model or every operating situation.

PLOS ONE: Accuracy of commercial electronic nicotine delivery systems (ENDS) temperature control technology

Keep the temperature object with your summary

When a headline says a device stayed at a temperature, ask whether it refers to the target, the estimate or a sensor trace. If it uses the sensor trace, add the sensor position and time window to your note. If only the set point is reported, leave the measured value open. If only an end value is available, preserve that timing.

The useful output is a description of which curve answers which question. This does not identify a temperature to choose, an exposure level or the temperature inside a person’s body. It also requires no adjustments or testing of a device at home.

PLOS ONE: Accuracy of commercial electronic nicotine delivery systems (ENDS) temperature control technology

Sources and scope

Sources inform the guidance. The worksheets and examples are No Vape editorial suggestions, not tested treatments.

  1. PLOS ONE — Accuracy of commercial electronic nicotine delivery systems (ENDS) temperature control technology
  2. No Vape — No Vape — app features and store links

Written with AI assistance and checked against the cited sources. No clinical review is claimed. This guide covers practical planning, not individual medical treatment. How we research and write